Our Service
Location: Home > High TG PCB
High TG PCB

High TG PCB

Brief

Description


High-Tg circuit boards (HTg)

 

For printed circuit boards exposed to high thermal loads, the necessary long-term operating temperature must be determined early on, in order to select an appropriate material. 

The Tg value of the base material can be used for this purpose as a reference. Below we have summarized the details for you.

 

Typical application areas

·   Multilayer boards with many layers

·   Industrial electronics

·   Automobile electronics

·   Fineline trace structures

·   High temperature electronics 


Tg Value

The glass transition temperature (Tg) is an important normative dimension for the base material that determines the temperature at which the resin matrix converts from a glassy, brittle condition into a soft, elastic one. 

The Tg value of the base material sets here an upper boundary, at which the resin matrix decomposes and a subsequent delamination occurs. The Tg is thus not the value of the maximum operational temperature, but rather that which the material can endure for only a very short time.

A guideline for a continuous thermal load is an operating temperature approximately 25°C below the Tg.

When the glass transition temperature (Tg) is over 170°C, it is referred to as a high Tg material.

        ·    High Tg materials have the following properties:

·   High glass flow temperature value (Tg)

·   High temperature durability

·   Long delamination durability

·   Low Z axis expansion (CTE)

 

 

*CAF - Conductive Anodic Filament: an undesirable conducting filament in the substrate of a circuit board

Depending on the stock on hand, the materials listed may be replaced by technically equivalent or similar products. For critical tolerances, please discuss your requirements with our engineers.

 

CTE-z

The CTE value shows the thermal expansion of the base material. CTE-z represents the z-axis and is e.g. due to the stability of the vias, of high importance. A higher Tg value favors a low CTE-z value which represents the absolute expansion in the z-axis. Errors like pad lifting, corner cracks and cracks within the via can be prevented through a low CTE-z value.

 

T260 - T288 value, Td

The decomposition temperature Td of a resin system depends on the binding energies within the polymers, and not on the glass transition temperature Tg. A good indicator for this characteristic is the T260 or T288 value, which specifies the time until delamination at 260°C or 288°C, respectively.

A very important indicator of the heat resistance is the time-to-delamination at a certain temperature. This test is preferably performed at 260 °C or 288 °C. The T260- or T288-value is the time to delamination of the tested material at 260 °C or 288 °C, repectively.

Td: Temperature-of-decomposition indicates the temperature at which the base material has lost 5% by weight and is an important parameter for the thermal stability of a base material. Through exceeding this temperature an irreversible degradation and damage to the material by the decomposition occurs.

 

Providing the Right High-Temperature PCB for Your Applications

KINGTON offers a wide selection of high-temperature PCB products manufacturing services either with FR-4 or other high-quality heat- and temperature-resistant Tg materials. We are able to perform high-temperature PCB fabrication for automotive, industry and high-temperature electronics applications. We can manufacture High-Tg PCBs with a Tg value of up to 180°C. Following table lists some of our commonly used materials for High-Tg PCBs production.

Material

TG 
(DSC, °C)

Td 
(Wt, °C)

CTE-z 
(ppm/°C)

Td260 
(min)

Td288 
(min)

S1141 (FR4)

175

300

55

8

/

S1000-2M (FR4)

180

345

45

60

20

IT180

180

345

45

60

20

Rogers 4350B

280

390

50

/

/

 

Regardless of the scope or complexity of your PCB application, we have the technical expertise to develop customized PC boards that meets your specific demands. Check PCB capabilities in here

 


TALK

dillonzhen77

TALK

+8618689485007